Sensor status
0 Status
12:09

Sensor status
0 Status

Status of specific KPI tracking - on other sensor

In status since 30.11.2025 at 12:08
The echo sensor responds to the sensors on the left, with alternate . warning and error limits. Sensors with logging can also be set up to monitor a dip or a rise in KPI.

The KPI on this sensor: 0=All good, 1=warning, 2=error.


o For sensor DBUSRMEMORY Max memory consumption
o Ruleset RULESET-ONE

Settings overview

LevelRule'Value lowValue high Message
RULESET-ONE This is just a test trial setup example
WARNINGBREAK-ABOVE100000 Rule BREAK-ABOVE: source sensor has no logging
ERRORRANGE200 300
ERRORBREAK-BELOW50 Rule BREAK-BELOW: source sensor has no logging
NORMALOTHER

Measured sensor details


o Sensor DBUSRMEMORY Max memory consumption
o Measured KPI 65.541 Kb
General information on the sensor: warning: at 1 Status or higher, error: at 2 Status or higher, sensor name: ECHO Sensor status, parameter value: RULESET:RULESET-ONE, class/method: ZCL_SENSOR_MANAGER=>SENSOR_ECHO, duration: 15ms.